Affluent Cycle Industries

Super Glue

Suitable for bonding rubber, plastic, metal, wood, paper, leather, fabric, ceramic and more.

• Low viscosity
• Fast setting
• Specially designed for usage of materials that are chemically resistant as well as prove difficulty in bond substrate

Applications

• Wipe off moisture, oil and all other foreign matters on bonding surfaces.
• To obtain a best bonding result it is recommended to use a suitable primer on bonding surfaces before applying adhesive.
• Apply Lem-on L-3 super glue on the bonding surfaces evenly. After assembly hold or give a suitable pressure for a few seconds to the bonding materials for the setting time of the adhesive.

For more information on this product, please contact our product manager at +603 8766 6011

CONTACT ADHESIVES

Use to bond wood, plywood, sponge, formica, PVC carpet, metal, cloth and paper products.

Suitable for general purposes, light industry, furniture, construction and decoration industries.

• A cost-saving neoprene adhesive with high viscosity
• Short-track time
• Ease of application
• Strong bonding strength

Applications

• Apply a thin layer of Lem-on 201 Contact Adhesive on the bonding surfaces evenly. For effective bonding on absorbent surfaces and porous material normally two coats are required.
• For bonding surfaces assemble under room temperature. The recommended time is 30 to 45 minutes.
• For bonding surfaces with higher absorbent rate the open time shall be shorter but for smooth bonding surfaces the open time shall be longer.

For more information on this product, please contact our product manager at +603 8766 6011

SPRAY ADHESIVES

Use to bond mattresses, PU and latex foam, wood, rubber, cloth, fibrous materials, metal, formica, ABS, PVC, cement, chipboard and more.

Suitable for light industry, handmade industry, building and construction industry, furniture industry, paper industry and automobile industry.

• A low viscosity spray adhesive
• Specially formulated for adequate heat resistance bonding
• Formulated for use with air-pressure spray equipment
• Universal application methods
• Provides essential and permanent adhesion to various surfaces, including absorbent materials
• Fast grabbing
• High-bending strength

Applications

• Wipe off moisture, oil and all other foreign matter on bonding surfaces. Use a primer on bonding surfaces prior to application.
• Apply Lem-On R-169 evenly on bonding surfaces. For more effective bonding, coat both surfaces.
• Expose the bonding surfaces at room temperature for 10 to 15 minutes before assembly. Then, apply pressure on both bonding surfaces.
• The full bonding strength is obtained after 24 hours.

For more information on this product, please contact our product manager at +603 8766 6011

SOLVENT CEMENT ABS

Use on pipe ends that must be cut off at the right angles, allowing it to provide resistance to water and weather.

• Specially designed for joint resistance with shear strain pressure and sewage pipes with ABS fittings

Applications

• Wipe off moisture, oil and all other foreign matters on bonding surfaces. The bonding surfaces (pipe end outside, coupling inside) can be clean up by using a suitable cleanser and must be dry prior to application of adhesive.
• The Lem ABS Solvent Cement must be stir well before use. Apply a thin and uniform coating of adhesive on both mating surfaces.
• Recommended brush sizes are as below: 32mm = 8mm round brush, 32 - 50mm = 1"-flat brush, 65 - 160mm = 2"-flat brush.

For more information on this product, please contact our product manager at +603 8766 6011

PVC SOLVENT CEMENT

• Low viscosity
• Fast-setting liquid cement
• Specially formulated for adhesion of unplasticised PVC pipe, CPVC and rigid PVC
• Formulated to have unique waterproof bonding features
• Firm bonding strength

Applications

• Wipe off moisture, oil and all other foreign matters from both inside and outside of the pipe and socket.
• To obtain the best bonding result it is recommended to use suitable cleaning fluid on the joining surfaces before applying LEM S-100.
• Apply one coat of LEM S-100 evenly to the matting surfaces using a clean brush and stroking the solvent cement along and not around the surfaces.
• Allow 15 minutes for good handling strength.
• Allow cure time for 24 to 48 hrs before pressure.

For more information on this product, please contact our product manager at +603 8766 6011

Epoxy Adhesive

Suitable for bonding of metal and metal alloys, pipes, metal tanks, concrete and stone, rubber and concrete, ceramic materials, glassware, auto trimmings, knobs, china, porcelain, wood, fiberglass repair and more.

• Fast setting
• A two-part adhesive with high viscosity
• Non-shrinking
• High mechanical strength
• Excellent resistance to most chemical environments
• Resistant to heat
• Fills gaps, making it water resistant as well as tolerant to most fuels and solvents
• Contains a superb dimensional stability as well as strong adhesion to a variety of substrates
• Easy to use when it comes to handling with high chemical resistance and mechanical performance after use

Applications

• To obtain the best bonding result ,suitable primer is recommended to be used on bonding surfaces before applying the adhesive.
• Apply a thin layer of HSQ-01 mixture on both side of the bonding surfaces.
• Assemble bonding surface before mixture become gel.
• After assemble, a suitable pressure is apply on the bonding surface to ensure the mixture would spread evenly and thoroughly between the bonding surfaces.
• Allow cure time for 15 minutes. The mixture will be fully cure after 2 hours.

For more information on this product, please contact our product manager at +603 8766 6011

PU ADHESIVES

Suitable for bonding soft and rigid PVC, PVC sheet lamination, PU leather and injected sole, rubber, leather, EVA, nylon cloth, rigid nylon, high-absorbent bonding material, shoe materials with high plasticiser and more.

• Strong initial bonding strength
• Waterproof as well as heat and weather resistant
• Excellent consistency in appearance, making it ideal when bonding white or light coloured shoe material
• Specially designed for the usage of heat-activated method
• Provides a medium crystalisation

Applications

• It is recommended to roughened bonding surfaces such as EVA, rubber and leather to acquire better bonding results.
• Wipe off moisture, oil and all other foreign matters on bonding surfaces.
• To obtain the best bonding result it is recommended to use suitable primer on bonding surfaces before applying Lem-On 800 adhesive.

For more information on this product, please contact our product manager at +603 8766 6011

PVC Primer

• Improve the adhesion of PVC materials
• Improve absorption and bonding strength by coarsening and changing the structure formation of the material’s surface
• Used primarily to remove oil, dirt and stain as well as wetting the surface
• Fast-drying
• Easy-to-use to effectively clean the surface
• Act as a coating material on bonding surfaces

Applications

• Apply evenly on bonding surfaces.
• Apply adhesive within 53 to minutes after application of primer for better bonding results.
• Apply in a well-ventilated area.

For more information on this product, please contact our product manager at +603 8766 6011

Graft Adhesive

• Cost-effective
• High viscosity
• High solid
• Excellent bonding strength
• Long-track time
• Easy application
• Good stability
• Specially designed for medium and high-absorbent materials

Applications

• It is recommended to roughened bonding surfaces such as EVA, rubber and leather.
• Wipe off moisture, oil and all other foreign matters on bonding surfaces.
• To obtain the best bonding result it is recommended to use suitable primer on bonding surfaces before applying the adhesives.
• Apply a thin layer of Lem-On 600 graft adhesive on the bonding surfaces evenly. For effective bonding on absorbent bonding surfaces such as leather two coats may be required.

For more information on this product, please contact our product manager at +603 8766 6011

No Nails Cement Construction Adhesive

No Nails Cement is a general purpose and polystyrene-safe construction adhesive with excellent bond on various building substrates such as polystyrene, particle board, structural flooring panels, concrete and cement sheeting, aluminium, plasterboard, galvanized iron, timber, and etc. Thus, it is suitable for internal application with excellent initial grab.

• Construction adhesive
• General purpose
• Polystyrene safe
• Excellent bond
• Low VOC
• Fast cure
• Strong grab

Applications

• Ensure surfaces to be bonded are clean, dry and free of wax, grease or any loose paint.
• Cut the nozzle and extrude a 4-6mm bead of adhesive to one of the prepared surfaces with a sealing gun. Beads should be spaced at 40-45cm apart with "Z"-shaped.
• For an immediate strong bond, press firmly the side with adhesive to the bonding place to transfer adhesive, then pull both surfaces apart for 2-5 minutes to allow for tack off. Reposition if necessary and press together.
• For wet bonding method, apply adhesive according to the above mentioned method. Immediately bond two sides together with the clamps on it. Remove the clamp after 24 hours.

For more information on this product, please contact our product manager at +603 8766 6011

Crop Guard

Crop Guard which contains high viscosity polymer adhesive to bond all flying insects effectively and it is non-toxic. Insects are easy to get killed as they strike against the sheet and stick on the glue. This glue does not dry out and weather resistant under hot sun or heavy rain.

• Effective
• Hygienic
• Weather resistant
• Easy to handle
• Contains no insecticide

Applications

• Apply thin coating evenly on UV stabilized plastic or any plastic sheet, plastic bag or cardboards. Tie or hang it 25-30cm above the crops. For plants are grown on the ground, it may be laid around the farms. For household’s usage, it can be hanging or stick to the ceiling or walls to catch flies, lizards, cockroaches, and other small insects. For the fish markets, it is best to place it near the dustbins.
• The crop guard glue can be used in commercial crops, greenhouses, homes, orchards, fish markets, flower and vegetable garden.
• The glue will stay sticky and attractive for several months. Change them sooner if more than half the surface is covered in insects or dust.

For more information on this product, please contact our product manager at +603 8766 6011

Mouse Trap Glue

Mouse Trap Glue which contains high viscosity polymer adhesive to bond mice or mouse effectively and it is non-toxic. It contains no pesticide and easy to use. It is strong and weather resistant glue specially designed for trapping mice/ mouse.

• No pesticide
• Weather resistant
• Strong-hold
• Hygienic
• Easy-to-use

Applications

• Apply a layer of the adhesive evenly in a paperboard surface.
• Place paperboard in the ground.
• Clean the ground before placing the paperboard to prevent dust from the ground being blown onto the adhesive.
• Suggest placing some food in the center of paperboard to attract the rats.

For more information on this product, please contact our product manager at +603 8766 6011